Grayboe Stock Assembly


We haven’t seen any noticeable difference in accuracy between our stocks that are bedded or un-bedded.

All Grayboe stocks are pillar bedded with aluminum pillars molded right into the stock.

All Grayboe stocks are made from a solid homogeneous fiberglass epoxy matrix. There is no gel coat or foam filler to worry about when machining, sanding, or wire jet cutting our stocks. Keep in mind that with such a wide range of available equipment and skill level, any customization done to our stocks will void the factory warranty. If you choose to customize your stock please consider using a qualified vendor.

  • Outlander = 2lbs 4oz
  • Terrain = 2lbs 8oz
  • Renegade = 3lbs 12oz
  • Ridgeback = 3lbs 12oz

First ensure you are working with a Remington 700 pattern action. There are some slight variations on custom Remington 700 actions that may require some light adjustments.

Next step is to determine the barrel contour. Every barrel manufacture has unique dimensions for various contours that are common to the market. Determine the measurement of your specific barrel contour and see how it lines up to the measurement of our barrel channels below. the measurement for Magnum or Grayboe Varmint can be found in the box in the lower left corner of this diagram: