Any chance making one for an A-bolt? Thanks

Unfortunately we don't have plans to make a stock for the Abolt at this time.

Will a magpul aics DBM fit this stock? And which option would I choose at checkout. Cheers

Unfortunatley our stocks don't fit Magpul bottom metals but you can pair the stock with a Grayboe M5 DBM and it feed your aics magazines.

Will this fit a Bergara B14 Ridge SP?

You have this rifle correct?  https://www.bergara.online/us/rifles/b14/ridge-rifle/.  If so, yes the Trekker fits that rifle. 

Can a rear qd cup be added in the rear? Can it be customized as to which side (lefty)?

Unfortunately flush cups can't be installed on the Trekker as there just isn't enough "meat" there to install them.  However, you can purchase these that attach to the studs and will work with your QD sling loops.  https://grovtec.com/collections/attachments-adaptors/products/push-button-base-to-stud-adaptor

Will it fit a ruger 22/77

Unfortunately our stocks don't fit Ruger rifles.

Do you still plan on offering the Trekker to fit Winchester M70s early this (2022) year?

Unfortunately not, don't have a hard set date on when we will have stocks for the model 70.

I have a Savage Tactical 110 in 7mm Mag… do y’all make a stock for Savage models?

Unfortunately we won't be getting into stocks for savage rifles until 2023 it looks like.

Can a Arca 1.5 in rail be installed?

Yes any Arca rail that attaches to a MLOK rail can be used.  Typically we see customers use an Area 419 universal 3" to 4" arca rail.

Will the long action stock fit a CIP length mag for 300prc ? Or can it be modified to do so?

It will fit but we'll need to open up the mag box area of the stock for an extended mag box if you are using a floor plate for bottom metal.  If you are using an AICS detachable box magazine a stock inlet for long action with M5 DBM will work.

Is this stock manufactured for CZ 557 varmint?

Unfortunately our stocks don't fit CZ rifles.

Do you have an inlet option for the Remington Model Seven action (or Defiance "Short" Action)?

Unfortunately our stocks don't fit actions that are the model 7 length.

Any update on when the Trekker will be available for a Tikka T3?

Don't have a hard set date on when that will be at this time.  Probably at least a year out.

Will 700 action with remage barrel nut fit?

Yes it will.

If I plan to use a Magpul AICS bottom floor plate, which configuration would require the least amount of modification?

If you are going to do the inlet yourself, you would start with the BDL floor plate inlet stock.  You can then machine out for the Magpul DBM.

Really interested in a Tikka T3x model for a proof barrel. Will you give us a estimated release date?

Don't have a hard set date on when we'll have the trekker ready for the T3.  It will probably be later on next year.

Could you offer a blank inlet so people could have their gunsmith mill out a custom inlet?

Unfortunately we don't have a blank for the Trekker stock.  It pops out of the mold ready for a Rem 700 footprint action.  However, we do have blanks on the Renegade and Phoenix stocks.

Can you do it for the Lithgow LA102 action is .223, are there plans, are they compatible with any other actions you offer

Unfortunately our stocks don't fit Lithgow actions.  At this time we don't have plans to make stocks for it.

Can this be custom ordered without the bubble level?

we don't have to install the bubble level if you don't want it.  However, the small cutout for the bubble level will still be there as that is molded in our Trekker molds.

Instead of the sling/bipod stud in the rear/butt can I order it with a flush cup?

Unfortunately there isn't enough material there to install the flush cup to the correct depth.

Wondering when your stocks will be inletted for Tikka T3 actions? Thank you.

Won't have the Trekker for the T3 until next year sometime.  Currently our Phoenix stock fits the T3.

Is this compatible with a Savage Model 111 Hog Hunter?

Unfortunately our stocks don't fit Savage rifles at this time.

I have a 700 that's re-barreled with a Proof Sendero carbon wrap and a new magnum recoil lug. What are the dimensions of the pocket for the recoil lug?

All Grayboe stocks fit recoil lugs up to .350" in thickness.

Can flush cups be added to the side of the Trekker's stock and forend?

Unfortunately not, there isn't enough "meat" there to install one.

Will you offer the Trekker or the Phoenix for a tapered barrel, say a #4 barrel?

Unfortunately the molds for the Trekker and Phoenix are universal barrel inlets only.

winchester model 70 long action. Mvmillan has a few. I would prefer to outfit my existing rifles with grayboe. ;)

We will have stocks for the model 70 eventually, probably early next year.

What is the largest recommended cartridge for this stock?

This really depends on the individual shooter.  As far as the stock goes, it can handle anything.  What caliber do you have?

Rifle build will be on a 700 action with a pacnor 1.20 “rem-nut” barrel with Holland recoil lug. Will this stock accommodate that?

Yes, it will drop right in.

My rifle will be used in temperatures to negative 30 ambient. What will your recoil pad be like in those temps?

It will function as it should if it were 75 degrees out and sunny.  Unaffected by temperatures.

Is the trekker a carbon fiber stock?

its a mix of our propreitary material but yes it does have carbon fiber in it.

Universal? So compatible with Ruger Gunsite Scout, or no?

Unfortunately not, the Ruger GSR is its own animal and not a Remington clone.

WHAT??? You have a stock for a recently deceased rifle ( Rem. 700 ) BUT NO TIKKA T3x love??? Are you KIDDING me? Read the industry sales stats guys....catch up will ya?

Recently deceased?  There are a dozen or so custom action manufacturers that make their actions off a Rem 700 footprint and by the volume of orders that come through I'd say business is booming!  There's gotta be a reason why they all use a Rem 700 footprint and not a T3 footprint.  You know why that is?  Good news is we will have stocks fitting the T3 over the next few months.  In fact, you can order a Phoenix stock right now for a T3.

Any chance of ruger American inlet, in particular for the AR magazine?

Eventually we will, don't have an approximate date on when that will be yet.

Really no Ruger m77 Come on guys!!!!!

Unfortunately not, we just don't get enough requests for the M77 to create a stock mold for that rifle.

No Savage actions?

Unfortunately not at this time.

Any plans to inlet for a CZ 527 American?

Unfortunately not at this time.

Will it be available for tikka t3x

Eventually yes, probably early next year.

What is the spacing between the two front sling studs?

3 inches.

Would this fit the bull barrel of a 700 SPS 308

Yes it will fit nicely in the Trekker stock.

Is there still plans of making this stock for savage actions?

Not at this time, we hope to have our Phoenix ready for the Savage 110 this summer.

Will your stocks fit a Tikka 7mm KH? If yes which ones. Thanks

do you have have a tikka T3 rifle?  If so, our phoenix and renegade stocks fit the T3.

Will this stock fit Christensen Arms Ridgeline with the Carbon Barrel?

Yes it will.

Can a Remington Model 7 be used in this stock with a m5 dbm?

Unfortunately our stocks don't fit the Model 7 rifle.

Is there an option that will fit a Howa 1500 action in .308?

Unfortunately our stocks don't fit Howa rifles.

Any chance of getting the trekker inletted for a CVA Paramount?

Unfortunately not at this time.  The CVA requires a specific inlet and only our Outlander and Terrain stocks are made for that model rifle.

Can you verify the bolt and thread pitch for the sling swivel studs? Is it #10-32 and 3/8”? Trying to mount the Area 419 universal plate and order screws to be flush. Thank you

Yes 10/32 thread and 3/8" is correct.

Do you have anything for Savage 110 left hand?

We hope to have the Phoenix ready for the savage 110 by early next year.

At some point do you plan to make the Trekker for the Tikka T3x?

Yes we more than likely make a Trekker for the T3 at some point.